Loading ...
Loading ...
Loading ...
(139,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
. Locking using the rear lock button.
For details, refer to “Locking with the
rear lock button” �P117.
. Locking using the power rear gate
lock button. For details, refer to
“Locking with the power rear gate
lock button” �P118.
Security indicator light
NOTE
. All doors, the rear gate and fuel filler
lid will lock, an electronic chirp will
sound once, the hazard warning
flashers will flash once, and the
security indicator light will start
flashing rapidly.
. If any of the doors or the rear gate is
not fully closed, an electronic chirp
sounds five times and the hazard
warning flashers flash five times to
alert you that the doors (or the rear
gate) are not properly closed. When
you close the door, doors will auto-
matically lock and the system will
automatically arm in 30 seconds.
5. Approximately 30 seconds later, the
system will enter surveillance state.
When the system is in surveillance state,
the security indicator light will then flash
slowly (twice approximately every 2 sec-
onds), indicating that the system has been
armed for surveillance.
NOTE
. The system can be armed even if the
windows and/or moonroof are open.
Always make sure that they are fully
closed before arming the system.
. The 30-second standby time can be
eliminated if you prefer. Have it
performed by your SUBARU dealer.
. If any of the following actions is
done during the standby period, the
system will not switch to the surveil-
lance state.
– Doors (including the rear gate)
are unlocked using the access
key fob/remote transmitter.
– Doors (including the rear gate)
are unlocked using the keyless
access function (models with
“keyless access with push-but-
ton start system”).
– Any door (including the rear gate
and engine hood) is opened.
– The ignition switch is turned to
the “ON” position (models with-
out “keyless access with push-
button start system”).
– Push-button ignition switch is
turned to the “ACC” position
(models with “keyless access
with push-button start system”).
& Disarming the system
S02AF05
Perform either of the following procedures.
. Briefly press a button (for less than 2
seconds) on the access key fob/remote
transmitter.
. Carry the access key fob and perform
either of the following procedures
(models with “keyless access with
push-button start system”).
– Grip the front door handle.
– Press the rear gate opener button.
– Unlock using the PIN code access.
The flashing of the security indicator light
will then change slowly (once approxi-
mately every 3 seconds from twice ap-
proximately every 2 seconds), indicating
that the alarm system has been disarmed.
– CONTINUED –
Alarm system
137
2
Keys and doors
Loading ...
Loading ...
Loading ...