Loading ...
Loading ...
Loading ...
(171,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
. When folding the rear seat, ensure
that the seat is empty prior to fold-
ing. Items caught between the seat
bottom and seatback, when folded,
may damage the seat surface or
activate the passenger seatbelt
warning light and chime.
! Operation
S03AE011501
If passengers in the rear seats do not
fasten their seatbelts while the ignition
switch is turned to the “ON” position, the
seatbelt warning lights will illuminate or
blink to indicate that their seatbelts are not
fastened.
NOTE
. If the rear passenger’s seatbelt(s)
are/is still not fastened while driving,
the seatbelt warning system oper-
ates as follows according to the
vehicle speed.
– The warning light will illuminate
when driving approximately 4
mph (6 km/h) or less.
– When driving approximately be-
tween 4 mph (6 km/h) and 13 mph
(20 km/h), if the seatbelts are not
fastened for 50 seconds, the
seatbelt warning lights will blink
and a warning chime will sound.
The chime will make a peep
sound for 15 seconds, and it then
will become louder and continue
for 35 seconds. The warning light
will blink for 50 seconds, then it
will illuminate steadily and the
chime will stop.
– When driving more than approxi-
mately 13 mph (20 km/h), if seat-
belts are not fastened for 35
seconds, the warning lights of
the unfastened seatbelts will
blink and a chime will sound
loudly. If the rear seatbelts are
not fastened after 35 seconds,
the blinking warning light will
illuminate steadily and the chime
will stop. The warning lights will
continue to illuminate until their
seatbelts are fastened.
. The warning light will turn off and the
warning chime will stop when the
seatbelt is fastened.
& SRS airbag system
warning light
S03AE02
WARNING
If the warning light exhibits any of
the following conditions, immedi-
ately stop the vehicle in a safe place,
and consult a SUBARU dealer. Un-
less a technician checks and repairs
the system as needed, the seatbelt
pretensioners and/or the SRS airbag
will not operate properly in the event
of a collision, which may result in
injury.
. Flashing or flickering of the warn-
ing light
. No illumination of the warning
light when the ignition switch is
first turned to the “ON” position
. Continuous illumination of the
warning light
. Illumination of the warning light
while driving
For details about the components mon-
itored by the warning light, refer to “SRS
airbag system monitors” �P104.
– CONTINUED –
Warning and indicator
169
3
Instruments and controls
Loading ...
Loading ...
Loading ...