Loading ...
Loading ...
Loading ...
(252,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
verse) position.
3. The outside mirror angle moves down-
ward.
The outside mirror angle will return to its
original position when the following condi-
tion are met.
. After approximately 9 seconds from the
select lever is moved to any position
other than R (Reverse).
. The ignition switch is turned to the
“OFF” position.
. The vehicle is running.
NOTE
. The reverse tilt-down mirror angle
can be registered with button “1”,
“2” or each of the key fobs. For
details, refer to “Memory function
(driver’s seat – if equipped)” �P35.
. The reverse tilt-down mirror angle
can also be retrieved with the Driver
Monitoring System user informa-
tion. To do so, perform user registra-
tion in the Driver Monitoring System
settings. Refer to “Driver Monitoring
System settings” �P214.
. The operational/non-operational
setting can be changed by operating
the combination meter display (col-
or LCD). For details, refer to “Vehicle
Setting” �P196.
. The factory setting (default setting)
for this function is set as the front
passenger’s side mirror. The setting
of the right and left side mirror/front
passenger’s side mirror operation
can be changed by a SUBARU deal-
er. Contact your SUBARU dealer for
details.
CAUTION
Depress the brake pedal during the
reverse tilt-down mirror angle ad-
justment.
To adjust the reverse tilt-down mirror
angle, adjust the outside mirror using the
remote control mirror switch while the
reverse tilt-down operates. For details
about how to adjust the outside mirror
angle, refer to “Remote control mirror
switch” �P249.
Memory function:
The angle of the reverse tilt-down mirror
can be registered. Register the position
with button “1”, “2” or each of the access
key fobs and retrieve the position.
For details about registration or retrieval of
a position, refer to “Memory function
(driver’s seat – if equipped)” �P35.
NOTE
If the seat is moved forward or back-
ward 1.18 in (30 mm) or more, the
reverse tilt-down will move to the
factory default position or the last
position hold.
Hold last position function:
The angle of the reverse tilt-down mirror
can be set to the latest adjusted angle.
The hold last position function operates
when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward
1.18 in (30 mm) or more.
NOTE
. The factory setting (default setting)
for this function is set as “non-
operational”. This setting can be
changed to “operational” at
SUBARU dealers. For more details,
contact a SUBARU dealer.
. If the hold last position function
setting is “non-operation”, the re-
verse tilt-down will move to the
factory default position.
Mirrors
250
Loading ...
Loading ...
Loading ...