Loading ...
Loading ...
Loading ...
(345,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
from the apply and release sound.
This can occur:
– If the brakes are extremely hot.
– If the car is parked on a steep
incline.
– If the electronic parking brake is
applied after the ignition switch is
turned OFF.
This is a normal operating sound under
any of these conditions.
. The Auto Start Stop system is deac-
tivated while the electronic parking
brake is applied.
. If you operate the electronic parking
brake switch while the Auto Start
Stop system is activated, the Auto
Start Stop system will be deacti-
vated. The electronic parking brake
will activate after the engine is
restarted. After the electronic park-
ing brake indicator light is illumi-
nated, release your foot from the
brake pedal.
. When starting the engine or restart-
ing the engine using the Auto Start
Stop system, if you operate the
electronic parking brake switch, the
electronic parking brake indicator
light may flash temporarily. How-
ever, this is not a malfunction if the
light turns off after the electronic
parking brake is deactivated.
! Automatic release function by ac-
celerator pedal
S07AP0301
The parking brake will be automatically
released by depressing the accelerator
pedal. However, the automatic release
function does not operate under the
following conditions.
. Any door (other than the rear gate) is
open.
. The driver’s seatbelt is not fastened.
If the parking brake is automatically
released, the electronic parking brake
indicator light and the indicator light on
the parking brake switch turn off.
! Auto Vehicle Hold function
S07AP0305
The Auto Vehicle Hold function will auto-
matically keep the vehicle stopped even
after releasing the brake pedal when the
vehicle is at a complete stop, such as at
traffic signals.
WARNING
. Do not use the Auto Vehicle Hold
function on a steep hill or slip-
pery road. The vehicle may move
even when using the Auto Vehicle
Hold function, causing serious
injury or accidents.
. Do not use the Auto Vehicle Hold
function to park the vehicle. The
vehicle may move unexpectedly,
causing serious injury or acci-
dents. Make sure to shift the
select lever to the “P” position
and apply the electronic parking
brake in the following cases.
– When you are going to park
your vehicle.
– When passengers are getting
in or out of the vehicle.
– When you are loading or un-
loading.
. When using the Auto Vehicle
Hold function, do not release the
brake pedal before the Auto Ve-
hicle Hold operation indicator
illuminates. The vehicle may
move unexpectedly, causing ser-
ious injury or accidents.
. Deactivate the Auto Vehicle Hold
function in the following cases.
Otherwise, the vehicle may move
unexpectedly, causing serious
injury or accidents.
– When washing your vehicle in
an automatic car wash
– When being towed
– CONTINUED –
Parking your vehicle
343
7
Starting and operating
Loading ...
Loading ...
Loading ...