Advanced User Guide - Page 329

For 3924C001.

Loading ...
Loading ...
Loading ...
Images and display
Under low- or bright-light conditions, the displayed image may not reflect the
brightness of the captured image.
Under low light, noise may be noticeable in image display even at low ISO speeds,
but there will be less noise in your shots, because image quality varies between
display and captured images.
The screen or exposure value may flicker if the light source (lighting) changes. In
this case, stop shooting temporarily and resume under the light source you will use.
Pointing the camera at different direction may momentarily prevent correct display
of brightness. Wait until the brightness level stabilizes before shooting.
If there is a very bright light source in the image, the bright area may appear black
on the screen. However, the actual captured image will correctly show the bright
area.
In low light, if you set [ : Disp. brightness] to a bright setting, noise or irregular
colors may appear in the image. However, the noise or irregular colors will not be
recorded in the captured image.
When you magnify the image, the image sharpness may look more pronounced
than in the actual image.
Custom Functions
Some Custom Functions are not available (some settings have no effect).
Lens and flash
If the attached lens has an Image Stabilizer and you set the Image Stabilizer switch
to <
>, the Image Stabilizer will operate at all times even if you do not press the
shutter button halfway. The Image Stabilizer consumes battery power and may
decrease the number of available shots depending on the shooting conditions.
When the Image Stabilizer is not necessary, such as when using a tripod, it is
recommended that you set the Image Stabilizer switch to <
>.
With EF lenses, focus preset during shooting is only available when using (super)
telephoto lenses equipped with this function released in and after the second half of
2011.
FE lock will not work if the built-in flash is used. FE lock and modeling flash will not
work if an external Speedlite is used.
Note
With HDMI Cable HTC-100 (sold separately), you can display images on a
television ( ). Note that no sound will be output.
329
Loading ...
Loading ...
Loading ...