Loading ...
Loading ...
Loading ...
Caution
[Multi Shot Noise Reduction] Precautions
If there is significant misalignment in the image due to camera shake, the noise
reduction effect may become smaller.
Be careful about camera shake in handheld shots. Using a tripod is recommended.
If you shoot a moving subject, the moving subject may leave afterimages.
Auto image alignment may not function properly with repetitive patterns (lattice,
stripes, etc.) or flat, single-tone images.
If the subject's brightness changes as the four consecutive shots are taken,
irregular exposure in the image may result.
After shooting, it may take some time to record an image to the card after
performing noise reduction and merging the images. “buSY” and “BUSY” appear in
the viewfinder and on the screen, respectively, as images are processed. Shooting
is not possible until processing is finished.
[Multi Shot Noise Reduction] is not available with bulb shooting, shooting with
AEB or white balance bracketing, shooting RAW or RAW+JPEG images, or with
features such as long exposure noise reduction.
Flash photography is not possible. Note that the AF-assist beam may be fired,
depending on the [
: AF-assist beam firing] setting.
[Multi Shot Noise Reduction] is not available (not displayed) when recording
movies.
The camera automatically switches to [Standard] if you set the power switch to
<
>, replace the battery or card, or switch to Basic Zone modes, bulb
exposure, or movie recording.
315
Loading ...
Loading ...
Loading ...