Loading ...
Loading ...
Loading ...
Note
Differences between <
> and < > modes
In < > mode, many functions, such as the AF method and metering mode, are
set automatically to prevent spoiled shots. The functions you can set are limited.
On the other hand, with <
> mode, only the shutter speed and aperture value are
set automatically. You can freely set the AF method, metering mode, and other
functions.
Program shift
With Program AE, you can freely change the combination (program) of shutter
speed and aperture value set by the camera while maintaining the same exposure.
This is called Program shift.
With Program shift, you can press the shutter button halfway, then turn the < >
dial until the desired shutter speed or aperture value is displayed.
Program shift is canceled automatically after the picture is taken.
Program shift cannot be used with flash.
144
Loading ...
Loading ...
Loading ...