Loading ...
Loading ...
Loading ...
Installing child restraint
systems
General information
Pay attention to the information, operating and
safety information of the child restraint system
manufacturer when selecting, installing and
using child restraint systems.
Safety information
WARNING
The stability of the child restraint system
is limited or compromised with incorrect seat
adjustment or improper installation of the child
seat. There is a risk of injuries or danger to life.
Make sure that the child restraint system fits
securely against the backrest. If possible, ad‐
just the backrest tilt for all affected backrests
and correctly adjust the seats. Make sure that
seats and backrests are securely engaged. If
possible, adjust the height of the head re‐
straints or remove them.◀
On the front passenger seat
Deactivating airbags
WARNING
Active front-seat passenger airbags can
injure a child in a child restraint system when
the airbags are activated. There is a risk of in‐
jury. Make sure that the front-seat passenger
airbags are deactivated and that the PASSEN‐
GER AIRBAG OFF indicator lamp lights up.◀
After installing a child restraint system in the
front passenger seat, make sure that the front,
knee and side airbags on the front passenger
side are deactivated.
Deactivate the front-seat passenger airbags
automatically, refer to page 143.
Seat position and height
Before installing a child restraint system, move
the front passenger seat as far back as possi‐
ble and bring it possibly up to medium height
to obtain the best possible position for the belt
and to offer optimal protection in the event of
an accident.
If the upper anchor of the safety belt is located
in front of the belt guide of the child seat, move
the front passenger seat carefully forward until
the best possible belt guide position is
reached.
Backrest width
Adjustable backrest width: before installing a
child restraint system in the front passenger
seat, open the backrest width completely. Do
not change the backrest width again and do
not call up a memory position.
Child seat security
The safety belts in the rear and the front pas‐
senger safety belt can be permanently locked
to fasten child restraint systems.
Locking the safety belt
1.
Pull out the belt strap completely.
2. Secure the child restraint system with the
safety belt.
3. Allow the belt strap to be pulled in and pull
it tight against the child restraint system.
The safety belt is locked.
Unlocking the safety belt
1.
Unbuckle the belt buckle.
2. Remove the child restraint system.
Seite 99
Transporting children safely Controls
99
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...