Loading ...
Loading ...
Loading ...
▷ When selector lever position D is disen‐
gaged.
▷ When DTC is activated or DSC is deacti‐
vated.
▷ When DSC is actively controlling stability.
▷ If the safety belt is unbuckled and the driv‐
er's door is opened while the vehicle is
standing still.
▷ If the system has not detected objects for
an extended period, e.g., on a road with
very little traffic without curb or shoulder
markings.
▷ If the detection range of the radar is im‐
paired, e.g., by dirt or heavy fog.
▷ After a longer stationary period when the
vehicle has been braked to a stop by the
system.
Setting the speed
Maintaining and storing the speed
Press the rocker switch while the system is in‐
terrupted.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
The stored speed is displayed in the speedom‐
eter and briefly in the instrument cluster, refer
to page 179.
DSC will be switched on, if needed.
The speed can also be stored by pressing a
button.
Press button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the
road is clear.
▷ Each time the rocker switch is pressed to
the resistance point, the desired speed in‐
creases or decreases by 1 mph/1 km/h.
▷ Each time the rocker switch is pressed
past the point of resistance, the desired
speed increases or decreases by a maxi‐
mum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the
action.
Adjusting distance
Safety information
WARNING
The system does not release from the
personal responsibility. Due to the system lim‐
its, braking can be late. There is a risk of acci‐
dents or risk of property damage. Be aware to
the traffic situation at all times. Adjust the dis‐
tance to the traffic and weather conditions and
maintain the prescribed safety distance, possi‐
bly by braking.◀
Seite 178
Controls Driver assistance systems
178
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...