Loading ...
Loading ...
Loading ...
After a power failure
To reestablish parking brake functionality after
a power failure:
1. Turn on standby state.
2.
Pull the switch while stepping on the
brake pedal or selector lever position P is
set and then push.
This process may take a few seconds. Any
sounds associated with this are normal.
The indicator lamp is no longer illumi‐
nated as soon as the parking brake is
ready for operation again.
Turn signal, high beams,
headlight flasher
Turn signal
Turn signal in exterior mirror
When driving and during operation of the turn
signals or hazard warning system, do not fold
in the exterior mirrors, so that the signal lights
on the exterior mirror are easy to see.
Using turn signals
Press the lever beyond the resistance point.
The lever returns into its starting position after
actuation.
To switch off manually, slightly tap the lever to
the resistance point.
Triple turn signal activation
Slightly tap the lever up or down.
The triple turn signal duration can be adjusted.
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "One-touch turn signal"
6. Select the desired setting.
The setting is stored for the driver profile cur‐
rently used.
Signaling briefly
Press the lever to the resistance point and hold
it there for as long as you want the turn signal
to flash.
High beams, headlight flasher
Push the lever forward or pull it backward.
▷ High beams, arrow 1.
▷ High beams off/headlight flasher, arrow 2.
Washer/wiper system
General information
Do not use the wipers if the windshield is dry,
as this may damage the wiper blades or cause
them to become worn more quickly.
Seite 108
Controls Driving
108
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...