Loading ...
Loading ...
Loading ...
With side collision warning
If at speeds between 45 mph/70 km/h and
130 mph/210 km/h, the vibrating steering
wheel is ignored and the lane marking crossed,
the system intervenes with a brief active steer‐
ing intervention and helps to return the vehicle
into the lane. The steering intervention can be
noticed on the steering wheel and can be man‐
ually overridden at any time.
Flashing of the lamp
A flashing of the lamp during vehicle unlocking
serves as system self-test.
System limits
Safety information
WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe
the information regarding the system limits
and actively intervene, if needed.◀
Functional limitations
The system may not be fully functional in the
following situations:
▷ When a vehicle is approaching at a speed
much faster than your own.
▷ In heavy fog, rain or snowfall.
▷ In tight curves or on narrow lanes.
▷ If the bumper is dirty or iced up, or covered
with stickers.
▷ If cargo protrudes.
For vehicles with side collision warning, the
steering intervention can be limited, e.g., in the
following situation:
▷ In the event of missing, worn, poorly visi‐
ble, merging, diverging, or multiple lane
markings such as in construction areas.
▷ When lane markings are covered in snow,
ice, dirt or water.
▷ When the lane markings are not white.
▷ When the lane markings are covered by
objects.
▷ When driving very close to the vehicle in
front of you.
▷ If there are constant blinding effects be‐
cause of oncoming light, e.g., from the sun
low in the sky.
▷ When the windshield in front of the interior
mirror is fogged over, dirty or covered with
stickers, etc.
▷ During calibration of the camera immedi‐
ately after vehicle delivery.
A Check Control message is displayed when
the system is not fully functional.
Displaying warnings
Depending on the selected warning settings,
e.g., warning time, more warnings can be dis‐
played. However, there may also be an excess
of premature warnings of critical vehicles.
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communication
Commission regulations. Operation is gov‐
erned by the following:
FCC ID:
▷ NBG009014A.
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
▷ This device may not cause harmful inter‐
ference, and
▷ this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modifications or changes to
these devices could void the user's authority to
operate this equipment.
Seite 161
Safety Controls
161
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...