Loading ...
Loading ...
Loading ...
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks un‐
der these conditions, you should always switch
on the lights manually.
Daytime running lights
General information
In some countries, daytime running lights are
mandatory, so it may not be possible to switch
the daytime running lights off.
Switching on/off
Position of switch: , ,
The daytime running lights light up when
drive-ready state is switched on. After drive-
ready state is switched off, the parking lights
light up in position .
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. Select the desired setting.
The setting is stored for the driver profile cur‐
rently used.
Adaptive Light Control
Concept
Adaptive Light Control is a variable headlamp
control system that enables dynamic illumina‐
tion of the road surface.
General information
Depending on the steering angle and other pa‐
rameters, the light from the headlight follows
the course of the road.
To avoid blinding oncoming traffic, the Adap‐
tive Light Control does not swivel to the driv‐
er's side when the vehicle is at a standstill.
Depending on the equipment version, Adap‐
tive Light Control consists of one or several
systems:
▷ Cornering light, refer to page 136.
▷ Adaptive headlight range control, refer to
page 136.
Activating
Position of switch:
The Adaptive Light Control is active, when the
drive-ready state is switched on.
Corner-illuminating lights
In tight curves, e.g., on mountainous roads or
when turning, an additional, corner-illuminating
lamp is switched on that lights up the inside of
the curve when the vehicle is moving below a
certain speed.
The turning lights are automatically switched
on depending on the steering angle or the use
of turn signals.
When driving in reverse, the turning lights may
be automatically switched on regardless of the
steering angle.
Self-leveling headlights
The self-leveling headlights compensate for
acceleration and braking operations in order
not to blind the oncoming traffic and to achieve
optimum illumination of the roadway.
High-beam Assistant
Concept
The high-beam Assistant detects other traffic
participants early on and automatically
switches the high beams on or off depending
on the traffic situation.
Seite 136
Controls Lights
136
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...