User Manual - Page 57

For 2017 BMW 7 Series. Series: 7 Series

Loading ...
Loading ...
Loading ...
3 Open tailgate
4 Press and hold: panic mode
Press briefly: headlight courtesy delay fea‐
ture
Unlocking
Press button on the remote control.
Depending on the settings, refer to page 71,
the following access points are unlocked:
Driver's door and fuel filler flap.
All doors, tailgate, and fuel filler flap.
In addition, the following functions are exe‐
cuted:
The settings saved in the driver profile, re‐
fer to page 69, are applied.
The interior lights are switched on, unless
they were manually switched off. Switching
the interior lights on and off manually, refer
to page 138.
The welcome light, door handle lighting,
and Welcome Light Carpet are switched
on. These functions must be activated in
the Settings, refer to page 135.
Press the remote control button again to
switch on Welcome Light Carpet for the al‐
ready unlocked vehicle.
The rear sliding visor is moved into the po‐
sition, where it was prior to locking.
With anti-theft protection: Anti-theft pro‐
tection is switched off.
The alarm system, refer to page 72, is
switched off.
After opening the driver's door, the vehicle is
ready for operation, refer to page 20.
The light functions may depend on the ambi‐
ent brightness.
Convenient opening
Press and hold this button on the re‐
mote control after unlocking.
The windows and the glass sunroof are
opened, as long as the button on the remote
control is pressed.
Locking
1. Close the driver's door.
2.
Press button on the remote control.
All doors and the tailgate are locked.
The rear sliding visor is closed.
With anti-theft protection: Anti-theft pro‐
tection is switched on. It prevents the
doors from being unlocked using the lock
buttons or the door opener.
The alarm system, refer to page 72, is
switched on.
If the vehicle horn honks twice when you lock
the vehicle, this means that the drive-ready
state is still switched on. In this case, the drive-
ready state must be switched off by means of
the Start/Stop button.
Switching on the interior and exterior
lights
Press button on the remote control with
the vehicle locked.
The interior lights are switched on, unless
they were manually switched off. Switching
the interior lights on and off manually, refer
to page 138.
Door handle lighting and Welcome Light
Carpet are switched on if these functions
were activated. Settings, refer to
page 135.
The light functions may depend on the ambi‐
ent brightness.
If the button is pressed again within 10 sec‐
onds after vehicle was locked, the interior mo‐
tion sensor and tilt alarm sensor of the anti-
Seite 57
Opening and closing Controls
57
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...