Loading ...
Loading ...
Loading ...
Rear cooler
Safety information
WARNING
The cover of the opened cooler pro‐
trudes into the vehicle's interior. Injuries can
occur in the event of an accident, braking or
evasive maneuver. The content of the cooler
can be thrown into the vehicle's interior and in‐
jure occupants. There is a risk of injury. Close
the cooler after use when driving.◀
NOTE
If the cooler is horizontal, the compressor
oil spreads in the cooling circuit. There is a risk
of property damage. Place the cooler vertically
for at least one hour prior to operation so that
the oil can return into the compressor.◀
Opening
1.
Fold down the center armrest, refer to
page 237.
2. Opening the through-loading system, refer
to page 242.
3. Pull on the handle and fold the cover for‐
ward.
Switching on
The cooler can be operated at two levels.
1.
Turn on standby state.
2.
Press button once for each cooling
level.
The highest cooling power is active when
two LEDs are lit.
If the cooler was switched on the last time
standby state was switched off, it will be
switched on automatically the next time
standby state is switched on.
Switching off
Press button repeatedly until the LEDs go out.
Removing
1. Fold the cover away to the side.
2. Pull on the rear handle.
3. Pull cooler backward and remove it.
4. Fold the cover back.
Seite 233
Interior equipment Controls
233
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...