Loading ...
Loading ...
Loading ...
battery, or to the corresponding starting
aid terminal of the vehicle to be started.
4. Attach one terminal clamp of the negative
jumper cable to the negative terminal of
the battery, or to the corresponding engine
or body ground of assisting vehicle.
5. Attach the second terminal clamp to the
negative terminal of the battery, or to the
corresponding engine or body ground of
the vehicle to be started.
Starting the engine
Never use spray fluids to start the engine.
1.
Start the engine of the assisting vehicle
and let it run for several minutes at an in‐
creased idle speed.
2. Start the engine of the vehicle that is to be
started in the usual way.
If the first starting attempt is not success‐
ful, wait a few minutes before making an‐
other attempt in order to allow the dis‐
charged battery to recharge.
3. Let both engines run for several minutes.
4. Disconnect the jumper cables in the re‐
verse order.
Check the battery and recharge, if needed.
Tow-starting and towing
Safety information
WARNING
Due to system limits, individual functions
can malfunction during tow-starting/towing
with the Intelligent Safety systems activated,
e.g., approach control warning with light brak‐
ing function. There is a risk of an accident.
Switch all Intelligent Safety systems off prior to
tow-starting/towing.◀
NOTE
The vehicle can be damaged when tow‐
ing the vehicle with a single lifted axle. There is
a risk of property damage. The vehicle should
only be transported on a loading platform.◀
NOTE
When lifting the vehicle by the tow fitting
or body and chassis parts; damage can occur
on vehicle parts. There is a risk of property
damage. Lift vehicle using suitable means.◀
NOTE
With transport on a loading platform, do
not fasten vehicle by the chassis.◀
Transporting the vehicle
General information
The vehicle is not permitted to be towed.
Tow truck
The vehicle should only be transported on a
loading platform.
Pushing the vehicle
To remove a disabled vehicle from the danger
area, it can be pushed for a short distance. The
vehicle can only be pushed in selector lever
position N.
In order to ensure that the vehicle can roll, pro‐
ceed as follows:
1.
Switch on drive-ready state, refer to
page 102.
Seite 304
Mobility Breakdown assistance
304
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...