Loading ...
Loading ...
Loading ...
4. Turn the crank of the vehicle jack counter‐
clockwise to retract the vehicle jack and
lower the vehicle.
5. Remove the vehicle jack.
After the wheel change
1. Tighten the lug bolts crosswise. The tight‐
ening torque is 101 lb ft/140 Nm.
2. Stow the nonworking wheel in the cargo
area.
The nonworking wheel cannot be stored
under the cargo floor panel because of its
size.
3. Check tire inflation pressure at the next op‐
portunity and correct as needed.
4. Reinitialize the Flat Tire Monitor.
Reset the Tire Pressure Monitor.
5. Check to make sure the lug bolts are tight
with a calibrated torque wrench.
6. Drive to the nearest dealer’s service center
or another qualified service center or repair
shop to have the damaged tire replaced.
Emergency wheel
General information
In the event of a flat tire, the emergency wheel
can be used instead of the defective tire. The
emergency wheel is provided for temporary
use so that you can have the defective wheel
replaced.
Overview
The emergency wheel and the tools are lo‐
cated in the cargo area under the cargo floor
panel.
Removing the emergency wheel
1.
Pull the cargo floor panel upward directly
behind the rear backrests and remove it.
2. Open the ratchet strap.
3. Remove the tool holder.
4. Remove the emergency wheel from the
storage well. Do not remove any covers.
After the wheel change, insert the tool holder
into the storage well and secure it with the
ratchet straps.
Seite 286
Mobility Wheels and tires
286
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...