Loading ...
Loading ...
Loading ...
Operation is also possible using BMW Touch
Command.
Climate control operation on the
roofliner
Temperature
Turn the ring to set the desired
temperature.
Air flow
Press the left or right side of the but‐
ton: decrease or increase air flow.
LEDs indicate the intensity of the air supply.
The air flow may be reduced automatically to
save battery power.
Ventilation
Thumbwheel for changing the air flow direc‐
tion.
Parked-vehicle ventilation
Concept
General information
The system can be switched on and off di‐
rectly or via a pre-set departure time.
The activation time is determined based on the
external temperature. The system promptly
switches on before the selected departure
time.
Functional requirements
▷ The vehicle is in idle state or standby state
and not in drive-ready state.
▷ Battery is sufficiently charged.
If parked-vehicle ventilation/heating is
switched on, the vehicle battery will be dis‐
charged. Thus, limit the maximum activa‐
tion time to save the vehicle battery. The
system will be available again after engine
starting and/or a short trip.
▷ Parked-vehicle heating: the fuel tank ca‐
pacity is sufficient.
The parked-vehicle heating function can
be limited if the fuel tank is low and the ve‐
hicle is parked in an inclined position.
▷ Make sure that the vehicle's date and time
are set correctly.
▷ Open the vents to allow air to flow out.
Switching on/off directly
There are different ways to switch the system
on or off.
The system switches off automatically after a
certain period of time. The system continues
to run for some time after being switched off.
Using the button
When the vehicle is in standby state, the sys‐
tem can be switched on or off via the auto‐
matic climate control buttons.
Press any button except:
▷ Rear window defroster.
▷ Left side of air flow button.
▷ Seat heating.
▷ Seat ventilation.
▷ SYNC program.
Seite 219
Climate control Controls
219
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...