Loading ...
Loading ...
Loading ...
▷ Stop-and-go traffic.
▷ Selector lever position in N or R.
▷ After driving in reverse.
▷ Use of fuel with high ethanol content.
Starting the engine
Functional requirements
The engine starts automatically under the fol‐
lowing conditions:
▷ By releasing the brake pedal.
▷ When Automatic Hold is activated: press
the accelerator pedal.
General information
After the engine starts, accelerate as usual.
Safety mode
After the engine switches off automatically, it
will not start again automatically if any one of
the following conditions are met:
▷ The driver's safety belt is unbuckled and
the driver's door is open.
▷ The hood was unlocked.
Some indicator lights light up for a varied
length of time.
The engine can only be started via the Start/
Stop button.
System limits
Even if driving off was not intended, the deacti‐
vated engine starts up automatically in the fol‐
lowing situations:
▷ Excessive warming of the vehicle's interior
when the cooling function is switched on.
▷ Excessive cooling of the vehicle's interior
when the heating is switched on.
▷ If window condensation is imminent.
▷ The steering wheel is turned.
▷ Change from selector lever position D to N
or R.
▷ Change from selector lever position P to N,
D, or R.
▷ Vehicle battery is heavily discharged.
▷ Start of an oil level measurement.
Activating/deactivating the system
manually
Concept
The engine is not automatically switched off.
The engine is started during an automatic en‐
gine stop.
Using the button
Press button.
Via selector lever position or Driving
Dynamics Control
The Auto Start/Stop function is also deacti‐
vated in selector lever position M/S or in
SPORT driving mode of the Driving Dynamics
Control.
Display
▷ LED comes on: Auto Start/Stop function is
deactivated.
▷ LED goes out: Auto Start/Stop function is
activated.
Seite 104
Controls Driving
104
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...