Loading ...
Loading ...
Loading ...
Pinch protection system
General information
If the closing force when closing the glass sun‐
roof exceeds a certain value, the closing move‐
ment is stopped, beginning at approximately
the middle of the opening in the roof, or from
the tilted position during closing.
The glass sunroof reopens slightly.
Closing from the open position
without pinch protection
If there is an external danger, proceed as fol‐
lows:
1.
Press the switch forward beyond the re‐
sistance point and hold.
The pinch protection is limited and the
glass sunroof reopens slightly if the closing
force exceeds a certain threshold.
2. Press the switch forward again beyond the
resistance point and hold until the glass
sunroof closes without jam protection.
Make sure that the closing area is clear.
Closing from the raised position
without pinch protection
If there is an external danger,
push the switch forward past the
resistance point and hold it.
The glass sunroof closes without jam protec‐
tion.
Initializing after a power interruption
General information
After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent.
The system can be initialized when the vehicle
is stationary and the engine is running.
During the initialization, the glass sunroof
closes without jam protection.
Initializing the system
Press the switch up and hold it
until the initialization is com‐
plete:
Initialization begins within
15 seconds and is completed
when the glass sunroof and sliding visor are
completely closed.
Seite 79
Opening and closing Controls
79
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...