User Manual - Page 116

For 2017 BMW 7 Series. Series: 7 Series

Loading ...
Loading ...
Loading ...
5. Release brake, as soon as the starter
stops.
6. Maneuver the vehicle from the danger area
and secure it against moving on its own.
For additional information, see chapter Tow-
starting and towing.
Launch Control
Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry sur‐
rounding conditions.
General information
The use of Launch Control causes premature
component wear since this function represents
a very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 248, period.
Do not steer the steering wheel when driving
off with Launch Control.
Functional requirements
Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving
of at least 6 miles/10 km.
Start with launch control
1.
Switch on drive-ready state.
2.
Press button.
TRACTION is displayed in the instrument
cluster and the indicator lamp for DSC OFF
lights up.
3. Engage selector lever position S.
4. With the left foot, forcefully press down on
the brake.
5. Press and hold down the accelerator pedal
beyond the resistance point at the full
throttle position, kickdown.
A flag symbol is displayed in the instru‐
ment cluster.
6. The starting engine speed adjusts. Within
3 seconds, release the brake.
Repeated use during a trip
After Launch Control was used, the transmis‐
sion must cool down for approx. 5 minutes, be‐
fore Launch Control can be used again.
Launch Control adjusts to the surrounding
conditions, when used again.
After using Launch Control
To increase vehicle stability, activate DSC Dy‐
namic Stability Control again as soon as possi‐
ble.
System limits
An experienced driver may be able to achieve
better acceleration values in DSC OFF mode.
Driving Dynamics Control
Concept
The Driving Dynamics Control influences the
driving dynamics properties of the vehicle. The
vehicle can be adjusted depending on the sit‐
uation using various driving modes.
General information
The following systems are affected:
Engine characteristics.
Steptronic transmission.
Dynamic Damping Control.
Air suspension.
Active roll stabilization.
Integral Active Steering.
Display in the instrument cluster.
Cruise control.
Backrest width for comfort seats.
Seite 116
Controls Driving
116
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...