Loading ...
Loading ...
Loading ...
Switching on drive-ready state via
emergency detection of the BMW
display key
1. Hold the display key with its back against
the marked area on the steering column.
2. Switch on drive-ready state within 10 sec‐
onds.
If the display key is not detected, slightly
change the position of the display key and re‐
peat the procedure.
Resetting the BMW display key
If the charged display key cannot be switched
on anymore or if the display does not respond
to entries anymore, the display key can be re‐
set.
Press and hold the button on the left side of
the display key for at least 20 seconds, until
something appears on the display.
Integrated key
General information
The driver's door can be locked and unlocked
without remote control using the integrated
key.
The integrated key also fits the glove compart‐
ment.
Safety information
WARNING
For some country-specific variants, un‐
locking from the inside is only possible with
special knowledge.
If people must spend a longer time in the vehi‐
cle while it is very hot or cold outside, there is a
risk of injury or danger to life. Do not lock the
vehicle from the outside when there are people
in it.◀
NOTE
The door lock is permanently joined with
the door. The door handle can be moved.
When pulling the door handle with the
integrated key inserted, paint or key can be
damaged. There is a risk of property damage.
Remove the integrated key before pulling the
outside door handle.◀
Removing
Press the button, arrow 1, and remove the key,
arrow 2.
Seite 63
Opening and closing Controls
63
Online Edition for Part no. 0140 2 974 740 - VI/16
Loading ...
Loading ...
Loading ...