Loading ...
Loading ...
Loading ...
Instruments and warning/control lamps
Compass*
Fig. 80
Magnetic zones
The compass does not require calibration in
v
ehicl
es for which the navigation system was
mounted at the factory. The option compass
disappears.
The compass in vehicles in which the naviga-
tion system was not mounted at the factory,
is permanently and automatically calibrated.
If electronic or metal accessories (mobile
phone, television) are subsequently mounted
in the vehicle, the compass should be recali-
brated manually.
Adjusting the magnetic zone
●
Switch the ignition on.
●
Select the Settings menu followed by the
option Compass and Zone.
●
Select the magnetic zone corresponding to
the position of the vehicle
›››
Fig. 80.
●
Adjust and confirm the magnetic zone
(1-15).
Calibrating compass
To calibrate the compass you must be in one
of the valid magnetic zones with sufficient
space to be able to trace a circumference
with the vehicle.
●
Switch the ignition on.
●
Select the Settings menu followed by the
option Compass and Calibrate.
●
Confirm the message Turn through a
full circle to calibrate the compass
with key
on the wiper lever or key
on the multifunction steering wheel and then
t
urn thr
ough a full circle at around 10 km/h (6
mph).
When the corresponding cardinal point is dis-
played, the calibration is complete.
Service intervals
The service interval indication is shown on the
instrument panel display.
SEAT distinguishes betw
een services with en-
gine oil change (e.g. Oil change service) and
services without engine oil change (e.g. In-
spection).
»
83
Loading ...
Loading ...
Loading ...