Loading ...
Loading ...
Loading ...
Help with parking and manoeuvring
disappear from the measurement angle of
the sensors if it is too high or l
ow and the
system would no longer show it. Therefore,
it will not warn you of these objects. Ignor-
ing the warnings of the parking sensor sys-
tem could cause considerable damage to
the vehicle. This is also valid when using the
park assist (e.g. to park behind a truck or
motorcycle). Therefore, always keep a
close watch on the area in front of and be-
hind the vehicle while parking, and inter-
vene promptly if necessary.
●
To ensure that the system works properly,
the bumper sensors must be kept clean,
free of ice and snow and uncovered.
●
The bumper sensors may become dam-
aged or misaligned, for example, when
parking.
●
When cleaning the sensors with high-
pressure or steam cleaning equipment,
spray the sensors briefly at a distance of
no less than 10 cm.
Note
If there is a fault in the system, go to a spe-
cialised workshop
. SEAT recommends tak-
ing your car in for technical service.
Parking using the park assist sys-
t
em
Fig. 269
Detailed view of the centre console:
butt
on t
o switch the park assist system on man-
ually.
Fig. 270
Space detected: parallel or angle.
Parking preparations
●
The Traction control system ASR must be
t
urned on
›
››
page 284.
●
In parallel parking: press the
›››
Fig. 269 button as many times as neces-
sary to select the desired parking mode.
When the function is enabled, the lamp but-
ton will light up.
»
291
Loading ...
Loading ...
Loading ...