Loading ...
Loading ...
Loading ...
Help with parking and manoeuvring
●
When cleaning the sensors with high-
pr
essure or steam cleaning equipment,
spray the sensors briefly at a distance of
no less than 10 cm (4 inches).
Note
Acoustic sources may lead to erroneous
w
arnings on the parking sensor syst
em, e.g.
rough tarmac, cobbles or the noise of other
vehicles.
Connecting and disconnecting
Fig. 271 Detailed view of the centre console:
butt
on t
o connect or disconnect the park as-
sist.
Fig. 272 Parking sensor system sensors on the
front bumper
●
Press the butt
on when the ignition is
s
witched on
›››
Fig. 271.
●
Automatic connection: engage reverse
gear.
●
Automatic disconnection: drive faster than
15 km/h (9 mph).
The button lights up when the function is
switched on.
Special characteristics
●
The parking aid system sometimes detects
water on the sensors as an obstacle.
●
If the distance does not change, the warn-
ing signal will sound less loudly after a few
seconds. If the continuous signal sounds, the
volume will remain constant.
●
When the vehicle moves away from the ob-
stacle, the beeping sound automatically
switches off. On approaching the obstacle
again, the beeping sound will automatically
switch back on.
●
If the electronic parking brake is engaged
or the selector lever is set to P, no audible
warning will be emitted.
●
Your technical service centre can adjust the
volume of the warning signals.
Note
If the parking aid system is faulty, a contin-
uous audible w
arning will sound when it is
switched on for the first time, and the but-
ton will flash. Press the button to discon-
nect the park assist and have the system
checked as soon as possible by a special-
ised workshop.
295
Loading ...
Loading ...
Loading ...