Loading ...
Loading ...
Loading ...
Transport and practical equipment
WARNING
Improper use of the power sockets or elec-
trical devices coul
d lead to a fire and
cause serious injuries.
●
Never leave children unsupervised in the
vehicle. The power sockets and equipment
connected to them can be used when the
ignition is switched on.
●
Should a connected electrical device
overheat, switch it off and unplug it imme-
diately.
CAUTION
●
To av
oid damage to the vehicle's electri-
cal system, never connect equipment that
generates electrical current, such as solar
panels or battery chargers, to the 12 volt
power sockets in order to charge the vehi-
cle's battery.
●
Only use accessories with approved
electromagnetic compatibility according
to current regulations.
●
To avoid damage due to voltage varia-
tions, switch off all devices connected to
the 12 V power sockets before switching the
ignition on or off and before starting the en-
gine.
●
Never connect an appliance to the 12 volt
power socket that consumes more than the
power indicated in watts. Exceeding the
maximum power absorption could damage
the vehicle's electrical system.
For the sake of the environment
Do not leave the engine running when the
vehicl
e is at a standstill.
Note
●
Using devices with the engine st
opped
and the ignition switched on will drain the
battery.
●
Unshielded equipment can cause inter-
ference on the radio equipment and the ve-
hicle's electrical system.
●
Interference can occur on the radio's AM
waveband if electrical appliances are used
near the rear window aerial.
Vehicle power sockets
Fig. 171
Back of the centre console: 12 volt
po
w
er socket.
Fig. 172 Detailed view of the rear centre con-
sole: 230 v
olt European power socket.
Depending on your vehicle version, you may
hav
e a 12-v
olt power socket and/or a 230
volt power socket.
Maximum power consumption
Power socket
Maximum power con-
sumption
12 Volts 120 Watts
230 Volts 150 watts (300 watt peaks)
Make sure that the maximum power con-
sumption displ
ayed on each outl
et is not ex-
ceeded. The power consumption of devices is
shown on the model plate.
When connecting two or more electrical de-
vices at the same time, make sure that their
total consumption never exceeds 190 watts
›››
.
»
159
Loading ...
Loading ...
Loading ...