Loading ...
Loading ...
Loading ...
Driving
vehicle using the current steering angle.
The front of the v
ehicle turns more in com-
parison with the rear.
●
Do not be distracted from the traffic
when looking at the screen.
●
Always observe the area around the vehi-
cle, as the cameras do not always detect
children, animals or objects.
●
The system might not show all areas
clearly.
●
Only use the rear assist system when the
boot hatch is completely closed.
CAUTION
●
The camera only displ
ays 2D images on
the screen. Due to the lack of depth, it
might be difficult or impossible to recog-
nise protruding objects or cracks in the
road.
●
The cameras may not always be able to
detect objects such as thin rails, fences,
posts and trees, etc. This could result in
damage to your car.
Usage instructions
Fig. 275
Reverse assist indication: mode 2
connect
ed.
Function buttons on the screen:
displ
ay the menu; hide the menu.
T
urning off the reversing camera im-
ages.
Display help. The help list explains the
surfaces and lines on the camera image.
Press to exit help.
Mute the sound.
Adjust the display: bright, contrast, colour.
Switching on the orientation points for
rear parking perpendicular to the road
(mode 1).
Displaying the optical parking system.
Reverse assist works when the ignition is on or
with the engine running. After switching off
1
2
3
4
5
6
7
the ignition, the reverse assist image remains
briefly on the scr
een.
Connecting the r
everse assist
●
Select reverse gear. Mode 1 will be dis-
played.
Manual disconnection
●
Press the button (vehicles with an opti-
cal parking system).
●
OR: press a button on the factory-fitted in-
fotainment system, for example the but-
ton.
●
OR: press the button on the screen.
Automatic off
●
Release the reverse gear. The image turns
off after about 10 seconds, or, in vehicles with
parking systems (OPS), the OPS indication is
immediately displayed.
●
OR: Drive forward at more than 15 km / h (9
mph), approximately.
Do not use the reverse assist system in the
following cases
●
– If there is a fault in the dynamic chassis
control (DCC).
●
If the image displayed is not very clear or
reliable (low visibility or dirty lens).
●
If the space behind the vehicle cannot be
clearly or completely recognised.
298
Loading ...
Loading ...
Loading ...