Loading ...
Loading ...
Loading ...
Fuses and bulbs
exceeds than that of the car. If an LED light
fail
s, go to an authorised workshop for its
replacement.
Replacing the halogen headlight
bulbs
Fig. 62 In the engine compartment: coatings
on the l
eft headlight.
Fig. 63 Left headlight.
Dipped beam headlights
Daytime running lights
Main beam headlight and side light
T
urn signal
s
There is no need to remove the headlight to
replace bulbs.
Complete operations only in the sequence
given:
Turn signals (small bulb holder)
–
Open the bonnet .
–
Rotate the bulb holder
›››
Fig. 62
1
all the
w
ay t
o the left and pull it out backwards to-
gether with the bulb.
–
Depending on the model, the bulb is re-
moved directly from the bulb holder or it
may need to be rotated and then removed.
–
Replace the faulty bulb with a new identical
bulb.
–
Place the bulb holder in the headlight and
rotate to the right all the way.
A
Dipped beam headlights and
B
Day-
time running lights
–
Open the bonnet .
–
Remove the rubber cover on the rear of the
headlight.
A
B
C
1
–
R
ot
ate the bulb holder to the left all the
way and pull it out backwards together
with the bulb.
–
Depending on the model, the bulb is re-
moved directly from the bulb holder or it
may need to be rotated and then removed.
–
Replace the faulty bulb with a new identical
bulb.
–
Place the bulb holder in the headlight and
rotate to the right all the way.
–
Insert the rubber cover.
C
Main beam headlights
–
Open the bonnet .
–
Remove the rubber cover on the rear of the
headlight.
–
Press the wire clip downwards and pull the
bulb hol
der
›
››
Fig. 63
2
out together with
the bulb
.
–
Depending on the model, the bulb is r
e-
moved directly from the bulb holder or it
may need to be rotated and then removed.
–
Replace the faulty bulb with a new identical
bulb.
–
Place the bulb holder in the headlight and
pull the wire clip upwards until it clicks into
place.
–
Insert the rubber cover.
»
61
Loading ...
Loading ...
Loading ...