Loading ...
Loading ...
Loading ...
English 71
Troubleshooting
Troubleshooting
PROBLEM POSSIBLE CAUSE SOLUTION
Surface burner
clicks during
operation.
The control knob has been left
in the LITE position.
After the burner lights, turn
the control knob to a desired
setting.
If the burner still clicks,
contact a service technician.
The burners
do not burn
evenly.
Surface burner components
and caps are not assembled
correctly and level.
See page 60.
Surface burners are dirty. Clean surface burner
components. (See pages 60
and 62.)
Very large or
yellow surface
burner ames.
Wrong orice is assembled. Contact your installer. Check
the burner orice size and
contact your installer if you
have the wrong orice. Check
the LP gas conversion.
Surface
burners light
but oven
burners do not
light.
The oven door lock is turned
on.
The display will show the
Lock icon. Hold the oven door
open and press the START/
SET pad for 3 seconds. The
oven will beep and the Lock
icon will turn off.
Gas Pressure Regulator
shut off switch is in the ‘off
position.
Call a qualied service
technician.
PROBLEM POSSIBLE CAUSE SOLUTION
Display goes
blank.
The electrical outlet Ground
Fault Interrupter (GFI or GFCI)
has been tripped and needs to
be reset.
Your digital control has been
damaged.
Replace fuse or reset circuit
breaker.
Very large or
yellow oven
burner ames.
The oven burner air
adjustment shutters need to
be adjusted.
Call for a qualied service
technician.
Gas supply is not properly
connected or turned on.
See the Installation
Instructions that came with
your range.
Food does not
bake or roast
properly in the
oven.
Wrong cooking mode is
selected.
See pages 29-29, 39, 45.
The oven racks have not been
positioned properly for the
foods being cooked.
See page 33, 45.
Incorrect cookware or
cookware of improper size
being used.
See page 26.
Oven thermostat needs
adjustment.
See page 37.
There is aluminum foil on
racks and/or oven bottom.
See page 33.
Clock or timers not set
correctly.
See pages 30 and 32.
Loading ...
Loading ...
Loading ...