Loading ...
Loading ...
Loading ...
English 61
Maintaining your appliance
Maintaining your appliance
7. Set all burner heads on top of the
manifold valves in the same location
you removed them from.
The hole on the side of the burner heads
goes over the electrodes. The burner
heads are correctly installed when
they are at on the top of the manifold
valves.
8. Set all burner caps on top of the burner
heads.
These also need to be at on top of the
burner heads to ensure proper and safe
operation.
Make sure that the dual burner head
sits securely on the burner cup.
Make sure the gas path is aligned
between the burner cup and burner
head.
Precise Simmer Burner (RR)
NOTE
The caps on Precise simmer burner
(RR) and inside Dual Burner (RF) can be
interchangeably used.
Flat surface Concave line
2. Lift off and remove the burner grates
from the cooktop. Make note of the
burner sizes and locations of all the
surface burners.
3. Lift off burner caps from top of the
burner heads.
4. Lift the burner heads off the valve
manifolds and starter electrodes.
5. Clean all removable burner parts in
warm, soapy water. Do not use steel-
wool pads or abrasive cleaners on any
burner part.
6. Rinse thoroughly and completely dry all
parts before they are reassembled.
NOTE
Starter electrodes are not removable and
should only be wiped clean when the
controls are in the OFF position.
Loading ...
Loading ...
Loading ...