Loading ...
Loading ...
Loading ...
Opening the control centre
›
Press the bar at the
top of the screen and
drag down.
Closing the control centre
›
Tap on
.
Or:
›
Press the bar at the bottom of the screen and drag
up.
Or:
›
Wait 5 seconds.
Settings
›
To open edit mode, press any functional surface of
the preferred feature.
›
To add the preferred feature, move the desired
function from the top of the screen to the func-
tional surface at the bottom of the screen.
›
To close edit mode, tap on
.
Restriction
For safety reasons, operation of some Infotainment
functions while driving is not possible or is restricted.
The Infotainment system indicates this by means of
a message in the screen.
Basic settings
Setting basic functions
The following Infotainment functions are set in the
menu.
▶
Time and date.
▶
Language.
▶
Units.
▶
Restore factory settings.
Sound settings
The Infotainment sound is set in the menu
.
The following menu items can be set.
▶
Setting the equalizer.
▶
Adjusting the volume ratio.
▶
Volume adjustment of individual Infotainment
functions.
Some are adjustable, for example the following
menu items.
▶
Volume adjustment of voice commands.
▶
Setting the maximum volume when Infotainment
is turned on.
▶
Speed-dependent volume setting.
▶
Setting the Infotainment to mute with the park-
ing aid switched on.
Depending on the equipment, the following ad-
vanced sound settings can be set.
▶
Setting space optimisation.
▶
Setting the audio profiles according to genre.
▶
Adjusting the subwoofer volume.
Configuration wizard
The configuration wizard helps to set certain Info-
tainment functions.
The configuration wizard is automatically displayed if
there are at least two non-selected menu items after
turning on the Infotainment.
›
To switch o the automatic display, tap on
Don't
show again
when the configuration wizard is displayed.
›
For manual display, tap on
Configuration wiz-
ard
.
Setting the HOME menu
›
To display another page of the HOME menu, press
the screen with two fingers and drag it to the left
or right.
To add the preferred menu, proceed as follows.
›
Tap on an empty functional surface.
Or:
›
Press and hold an occupied functional surface and
then tap on an empty functional area.
›
Select a menu with the desired dimension of the
functional surface.
›
Tap on
to exit edit mode.
To remove the preferred menu, proceed as follows.
›
Press an occupied functional surface.
›
Tap on
.
›
Tap on to exit edit mode.
Setting the MENU
The position of the functional surfaces in the MENU
menu can be customized as follows.
›
Press and hold the desired functional surface until
it is free.
›
Move the functional surface to a dierent position.
Troubleshooting
Infotainment not responding
The Infotainment system must be restarted.
›
Press for more than 10 s.
›
Wait for the restart to complete.
86
Infotainment Amundsen › System
Loading ...
Loading ...
Loading ...