Loading ...
Loading ...
Loading ...
Troubleshooting
Cruise control system faulty
illuminates
›
Seek the help of a specialist garage.
Adaptive Cruise Control (ACC)
Functionality
Control
ACC maintains the set speed. When your vehicle ap-
proaches the vehicle in front, ACC will automatically
start to maintain the set distance to this vehicle.
Maintaining the set speed and the distance will here-
inafter be referred to as Control.
WARNING
ACC does not respond to stationary objects or to
crossing or oncoming objects.
ACC is intended primarily for use on motorways.
Speed range
Depending on the equipment, ACC allows a speed
setting in the range of 30-160 or 30-210 km/h.
If control is started at a speed of less than 30 km/h
on vehicles with an automatic transmission, the
speed is automatically increased to 30 km/h or con-
trolled according to the speed of the vehicle ahead.
Distance level
The distance from the vehicle ahead can be adjusted
in the range from 1 to 3.6 s in five dierent levels.
Automatic stop and start
A vehicle with an automatic transmission can be de-
celerated to a stop using the ACC and start moving
again. In the event of a long stop, a message will ap-
pear in the display, indicating that you must operate
the brake pedal.
›
Keep the brake pedal depressed until the vehicle in
front starts moving.
If the brake pedal is not depressed, control is inter-
rupted.
Overtaking
If your vehicle changes to the fast lane and no vehi-
cle is detected in front, ACC accelerates up to the
set speed.
Status display in the instrument cluster display
- ACC is activated
Depending on the equipment:
or
along with - Control is active
When the control starts, the set speed is dis-
played.
- ACC does not decelerate
suciently
›
Depress the brake pedal.
Operation
Operating with the lever
Activate ACC (control inactive)
Start or resume control/Increase speed in
steps of 1 km/h (sprung position)
Interrupt control (sprung position)
Deactivate ACC
Increase speed in steps of 10 km/h
Reduce speed in steps of 10 km/h
Set distance level
Start control/Reduce speed in steps of 1
km/h
Starting control with the current speed
›
Tap on .
Or:
›
If no speed is saved, move the lever to the sprung
position
.
Set distance level
›
Move the switch to the sprung position
or .
Line
A
appears in the
display, indicating the
change in distance.
›
Use the switch
to set the desired dis-
tance level.
For temporary acceleration
›
Depress the accelerator pedal.
124
Driver assist systems › Adaptive Cruise Control (ACC)
Loading ...
Loading ...
Loading ...