Loading ...
Loading ...
Loading ...
The engine makes noises after the cold start
The increased running noise is due to the briefly in-
creased engine speed. This is not a defect.
START STOP
Usage
The START STOP system reduces environmentally
damaging emissions, including CO
2
, and saves fuel.
If the system determine that the engine is not nee-
ded when the vehicle stops, it turns o the engine
and starts it again when moving o.
Functionality
Vehicle with manual transmission
A system-related engine switch-o occurs when
stopping, when switching the gear lever into the
neutral position, and when releasing the clutch pedal.
A system-related engine start occurs when the
clutch pedal is pressed down.
Vehicle with automatic transmission
A system-related engine switch-o occurs when the
brake pedal is actuated and the engine is stopped.
A system-related engine start takes place after re-
leasing the brake pedal.
Status display in the instrument cluster display
Engine is switched o via the START-STOP
system
Engine is not switched o via the START-STOP
system due to operating conditions that are
not met
Display of detailed information in the infotainment
screen
Vehicle status
Or:
Vehicle status
Operating conditions
Some conditions are systemic and can neither be in-
fluenced nor recognised. Therefore, the system may
react dierently in situations which seem identical
from the driver's perspective.
The driver must fulfil the following conditions.
✓ The driver's door is closed.
✓ The driver has fastened the seat belt.
✓ The driving speed was higher than 4 km.h after
the last stop.
Settings
Automatic activation
▶
Upon start-up of the engine.
▶
By selecting driving mode Eco » page 115, Opera-
tion.
Deactivate/activate system
›
Press the
button.
When the system is deactivated, the symbol illu-
minates in the button.
If a system-related engine switch-o occurs and the
system is deactivated, the engine will start.
Troubleshooting
The engine does not switch o when stopping, or
it starts before starting up
The system has detected that the engine is running.
Manual gearbox
Operation
NOTICE
Danger of engine damage!
▶
Shift to a higher gear before reaching the red area
on the tachometer scale.
NOTICE
Danger of gearbox damage!
▶
Fully depress the clutch pedal when changing gear.
▶
When not shifting gear, do not put your hand on
the shift lever.
Engaging reverse gear
›
Stop the vehicle.
›
Fully depress the clutch.
›
Move the shift lever to the neutral position.
›
Push the shift lever down.
›
Turn it completely to the left.
›
Wait briefly.
›
Engage reverse gear.
113
Starting and driving › START STOP
Loading ...
Loading ...
Loading ...