Loading ...
Loading ...
Loading ...
LOADING, STORAGE AND PASSENGER COMPARTMENT
607
4.
Rear fitting.
For rear fitting:
With the net fitted in the rear roof mount-
ings, hook the safety net's puller-straps
into the front load retaining eyelets in the
cargo area.
Front fitting.
For front fitting:
With the net fitted in the front roof mount-
ings, hook the anchoring straps into the
outer eyes on the rear of the seat slide rails
- it is easier if the backrests are straight-
ened and the seats are moved forward
slightly.
Pay attention to make sure that you do not
press the seat and backrest hard against
the net when they are moved back again -
only adjust until the seat or backrest
makes contact with the net.
IMPORTANT
If a seat or backrest is pushed backwards
hard into the safety net, the net and roof
mounts may be damaged.
5. Tension the safety net with the anchoring
straps.
Removing the safety net
The safety net can be easily removed and
folded up.
1. Reduce safety net tension by pressing the
button in the anchoring strap lock and
feeding out a little of the anchoring strap
on each side.
2. Press in the catches and detach both of
the anchoring strap's hooks.
3. Undo the upper attachments and release
the net from the roof mountings.
4. Press the red button on the rod to enable
folding and then roll up the net. Store the
net in its case.
Related information
•
Recommendations for loading (p. 599)
•
Load retaining eyelets (p. 601)
Loading ...
Loading ...
Loading ...