Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
* Option/accessory.
403
Positioning the car in the parking space
Principle for positioning during parallel parking.
Principle for positioning during perpendicular park-
ing.
1. Move the gear selector to the gear posi-
tion as instructed by the system, wait until
the steering wheel has been turned and
drive forward slowly.
2. Be prepared to stop the car when instruc-
ted by the graphic and message on the
centre display.
3. Select reverse gear and drive slowly back-
wards.
4. Be prepared to brake the car when
instructed by the graphic and message on
the centre display.
The function is deactivated automatically and
the graphics and message show that parking
is complete. It may be necessary for the driver
to correct the car’s position. Only the driver
can determine whether the car is properly
parked.
IMPORTANT
The warning distance is shorter when the
sensors are used by Park Assist Pilot
(PAP
133
) compared with when Park Assist
System uses the sensors.
Auto-brake during parking sequence
If the parking sensors detect a vehicle or
pedestrian within the intended route in front of
or behind the car during a parking manoeuvre,
the car is auto-braked to stationary.
The driver display then shows a pop-up mes-
sage where the driver can choose to cancel
the parking manoeuvre by tapping on
Cancel,
or tap Resume to continue the parking
sequence.
Proceed as follows after selecting
Resume:
–
Check that there is free space around the
car and follow the instructions in the cen-
tre display, such as:
To continue – Gently accelerate away
from object.
Related information
•
Park Assist Pilot* (p. 399)
•
Limitations of Park Assist Pilot* (p. 404)
133
Park Assist Pilot
Loading ...
Loading ...
Loading ...