User Manual - Page 479

For 2020 V60 Cross Country.

Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory.
477
The rubber cover is located above the adjuster knob.
Turn the adjuster knob clockwise and anticlockwise
respectively to change adjustment position.
Remove the protective rubber cover that
covers the adjuster knob.
Turn the control clockwise until it has
stopped in order to access adjustment
position 0.
Turn the adjuster knob anticlockwise to
select the desired adjustment position.
Adjustment positions are defined with an
audible and noticeable click.
> When the desired position has been
set, refit the protective rubber cover.
Then carry out the same procedure for
the other shock absorber.
NOTE
To achieve as good performance as possi-
ble, Volvo recommends that the adjuster
knobs are set at the same position for each
axle.
Recommended positions
Position Front Rear
Performance
position
adjustment
position 2
adjustment
position 4
Engineered,
factory setting
adjustment
position 6
adjustment
position 9
Comfort posi-
tion
adjustment
position 12
adjustment
position 15
Related information
Raise the car (p. 615)
Level control* and shock absorption
(p. 475)
Economical driving
To achieve the longest possible range, the
driver should plan driving and adapt driving
style and speed to the prevailing situation.
Before driving
Precondition the car before driving if pos-
sible using the charging cable connected
to the mains power circuit.
If preconditioning is not possible when it
is cold outside, use seat heating and steer-
ing wheel heating first of all. Avoid warm-
ing up the whole of the interior which
takes energy from the hybrid battery.
Choice of tyres and tyre pressure can
affect energy consumption - seek advice
on suitable tyres from an authorised Volvo
dealer.
Remove unnecessary items from the car -
the greater the load the higher the con-
sumption.
While driving
Activate drive mode
Pure.
Activate the
Hold function at higher
speeds during journeys that are longer
than the range of the electricity.
If possible, avoid using the
Charge func-
tion to charge the hybrid battery.
Loading ...
Loading ...
Loading ...