Loading ...
Loading ...
Loading ...
||
ELECTRIC OPERATION AND CHARGING
432
IMPORTANT
The ground fault breaker does not protect
the 230 V socket (alternating current)/
electrical installation.
Control unit LED
4
lamp.
LED lamp
If the control unit's built-in ground fault
breaker is tripped then the LED lamp illumi-
nates with a red constant glow - check the
230 V socket (alternating current).
IMPORTANT
•
Check the capacity of the socket.
•
Other electronic equipment connected
to the same fuse circuit must be dis-
connected if the total load is exceeded.
•
Do not connect the charging cable if
the socket is damaged.
Related information
•
Charging cable (p. 429)
•
Charging status in the charging cable's
control unit (p. 437)
Temperature monitoring of the
charging cable
For the car's hybrid battery to be charged
safely every time, the control unit for the
charging cable and the plug have built-in
monitoring devices for the temperature.
Temperature monitoring takes place in the
control unit and the plug.
NOTE
Volvo recommends a charging cable in
accordance with IEC 62196 and IEC
61851 which supports temperature moni-
toring.
Monitoring in the control unit
Charging is switched off if the temperature of
the control unit is too high. This is to protect
the electronics. This may take place at a high
outside temperature, for example, and/or
when strong sunlight shines directly on the
control unit.
4
LED (Light Emitting Diode)
Loading ...
Loading ...
Loading ...