Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory.
501
3. Screw in the towing eye until it reaches its
end stop.
Screw the eye in firmly. For example,
thread through the wheel bolt wrench* and
use it as a lever.
IMPORTANT
It is important that the towing eye is firmly
screwed into place - right in until it stops.
Removing the towing eye
–
Unscrew and remove the towing eye after
use and return it to its foam block.
Finish by refitting the cover onto the
bumper.
Related information
•
Towing (p. 499)
•
Recovery (p. 501)
•
Tool kit (p. 581)
Recovery
For recovery, the car is taken away with the
help of another vehicle.
Call a recovery service for recovery assistance.
The towing eye can be used to pull the car up
onto a recovery vehicle with a flatbed plat-
form.
IMPORTANT
Note that the car must always be transpor-
ted raised up with all the wheels on the
recovery vehicle's platform.
The car's position and ground clearance deter-
mine whether it is possible to pull it up onto a
flatbed platform. If the slope of the recovery
vehicle's ramp is too steep, or if the ground
clearance under the car is inadequate, then
the car may be damaged if you try to pull it up.
The car should then be lifted using the recov-
ery vehicle's lifting device.
WARNING
No one/nothing is allowed to remain
behind the recovery vehicle while the car
pulled up onto the flatbed platform.
Related information
•
Fitting and removing the towing eye
(p. 500)
HomeLink
®
*
14
HomeLink
®15
is a programmable remote con-
trol, integrated in the car's electrical system,
which can remotely control up to three differ-
ent devices (e.g. garage door opener, alarm
system, outdoor and indoor lighting) and
thereby replace the remote controls for them.
General
The figure is schematic - the version may vary.
Button 1
Button 2
Button 3
Indicator lamp
HomeLink
®
is supplied built-in to the interior
rearview mirror. The HomeLink
®
panel con-
Loading ...
Loading ...
Loading ...