Loading ...
Loading ...
Loading ...
LOADING, STORAGE AND PASSENGER COMPARTMENT
* Option/accessory.
606
Fitting and removing the safety
net*
The safety net prevents loads from being
thrown forward in the passenger compart-
ment in the event of sudden braking.
The safety net is fitted into four mounting
points.
For reasons of safety, the safety net must
always be fastened and anchored as descri-
bed below.
The net is made of a strong nylon fabric and
can be secured two different locations in the
car:
•
Rear fitting - behind the rear seat.
•
Front fitting - behind the front seats.
WARNING
Loads in the luggage compartment must
be anchored well, and also using a cor-
rectly fitted safety net.
Fitting the safety net
WARNING
It is necessary to ensure that the upper
securing points of the safety net are fitted
correctly and that the puller-straps are
hooked in properly.
Damaged safety nets must not be used.
NOTE
With forward mounting, the safety net is
most easily mounted via one of the rear
doors.
1. Unfold the safety net and make sure that
the split upper rod in the net is locked in
its extended position.
2. Hook one retaining hook of the net into
the front or rear roof mounting with the
anchoring strap locks turned towards you.
3. Hook the net's second attachment hook
to the roof bracket on the opposite side.
The telescopically sprung attachment
hooks make it easier to fit.
Take care to press forward the net's
retaining hooks for each respective roof
mounting's front end position.
Loading ...
Loading ...
Loading ...