Loading ...
Loading ...
Loading ...
67
ID: The ID number that is applicable to the proxy address.
Click the Refresh button to refresh the interface. To confirm settings, click the Save button.
Switch
The Switch menu is used to automatically allocate the IP address according to the specified IP segment.
The network camera can automatically register to the NVR. It is for you to set IP address, subnet mask,
gateway etc. of the switch.
Note: This function is for PoE products only. Do not connect a physical switch to the PoE ports of the
NVR as it may cause damage to the unit. The Switch function of the NVR is enabled by default. The IP
segment is 10.1.1.1. Usually we recommend using just the default setup method.
Below is a screenshot of the Switch menu:
IP Address: The default IP segment of the device.
Subnet Mask: The current default subnet mask of the device.
Default Gateway: The current default gateway of the device.
Please note, this option may only be applicable to devices with PoE ports physically provided on the unit.
Click the Refresh button to refresh the interface. To confirm settings, click the Save button.
P2P
The P2P screen allows users to access a QR code to connect their smartphone or tablet to the NVR. The
device uses an app called Amcrest View Pro, and it is available on both iOS and Android. Below is a
screenshot of the P2P settings screen:
Loading ...
Loading ...
Loading ...