Loading ...
Loading ...
Loading ...
Engine Servicing
4-47
4-47
Press new needle bearing into the left crankcase cover
using the special tools.
Tools:
Driver 07749–0010000
Attachment, 22 x 24 mm 07746–001A800
Pilot, 15 mm 07746–0040300
(1) NEEDLE BEARING
(1) BEARING REMOVER
Check the crankshaft oil seal and needle bearing for wear
or damage, replace them if necessary.
Remove the snap ring and washer, then remove the oil
seal.
Remove the needle bearing using the special tools.
Tools:
Bearing remover, 15 mm 07936–KC10500
Remover weight 07936–371020A
(1) SNAP RING (2) WASHER
(3) OIL SEAL (4) NEEDLE BEARING
(1) OIL PRESSURE RELIEF VALVE
Disassembly/Assembly
Remove the ignition pulse generator mounting flange
bolts and alternator wire clamp.
Remove the stator mounting socket bolts.
Remove the stator/ignition pulse generator from the left
crankcase cover.
Remove the oil pressure relief valve (page 4-1).
(1) BOLTS (2) IGNITION PULSE GENERATOR
(3) WIRE GUIDE (4) SOCKET BOLTS
(5) STATOR
5
4
3
2
1
1
4
3
2
1
1
1
1
Loading ...
Loading ...
Loading ...