Loading ...
Loading ...
Loading ...
5-21
5-21
Frame Servicing
Link Bearing Replacement
Remove the pivot collars and dust seals.
Remove the pivot bearings using the special tool.
Tool:
Bearing driver 07946–MJ0A100
Press a new pivot bearing in using the special tools.
Tool:
Bearing driver 07946–MJ0A100
Face the bearing with its marked side facing out.
Press the needle bearing so that it is 3.0 mm (0.12 in)
below the swingarm end.
Install the dust seals and pivot collars.
(1) PIVOT COLLAR A
(2) PIVOT COLLAR B
(3) DUST SEALS
(4) NEEDLE BEARINGS
(1) NEEDLE BEARINGS
(2) DUST SEAL
(3) BUSHING
Pivot Bearing Replacement
Replace the swingarm bearings as a set.
Remove the pivot bearings using the special tool.
Tool:
Bearing driver 07946–KA50000
Press a new pivot bearing in using the special tools .
Tools:
Driver 07749–0010000
Attachment, 24 x 26 mm 07746–0010700
Pilot, 20 mm 07746–0040500
Face the bearing with its marked side facing out.
Press the needle bearing so that it is 5.5 mm (0.22 in)
below the swingarm end.
Install the thrust bushings and the dust seal.
Disassembly
Remove the following:
– Bolts and drive chain cover
– Bolts and driven sprocket guard
– Screws and drive chain slider
– Chain tensioner
– Dust seal caps
– Dust seals
– Pivot collars
– Thrust bushings
Replace them if they have score marks, scratches, or
excessive or abnormal wear.
Check the shock mounts and swingarm for stress, cracks,
or other damage.
(1) DUST SEAL CAP
(2) DUST SEAL
(3) PIVOT COLLAR
(4) DUST SEAL
3 mm
(0.12 in)
4
4
3
3
2
1
4
3
2
1
5.5 mm (0.22 in)
2
1
1
3
Loading ...
Loading ...
Loading ...