Loading ...
Loading ...
Loading ...
Service and Maintenance
3-10
3-10
Exhaust Pipe And Muffler
Inspection
Check the muffler for clogging.
Check for loose or missing bolts and nuts.
Check the exhaust pipe and muffler for cracks or
deformation.
Check the exhaust pipe gasket.
Check the muffler gasket.
Loss of power will result if the exhaust pipe is broken.
(1) EXHAUST PIPE
(2) MUFFLER
Clutch System
System Inspection
1. Operate the clutch lever and check that no air has en-
tered in the system. If the clutch does not disengage
properly, or the lever feels soft or spongy, bleed the air
from the system.
2. Remove the reservoir cover and diaphragm and check
the clutch fluid level. If the level is low, inspect the
clutch hose and fittings for damage, deterioration,
cracks, or sign of leakage. Tighten any loose fittings.
Replace hose and fittings if necessary.
(1) CLUTCH FLUID RESERVOIR
(2) LOWER LEVEL LINE
4. Fill the radiator with coolant up to the filler neck.
5. Squeeze the radiator hoses alternately. If the coolant
level drops, continue to add coolant.
6. Fill the radiator with coolant up to the filler neck.
7. After this first filling, start the engine, check the coo-
lant level (page 1-1).
(1) FILLER NECK
1
2
1
2
1
Loading ...
Loading ...
Loading ...