Loading ...
Loading ...
Loading ...
Engine Servicing
4-49
4-49
Flywheel
Removal
Remove the left crankcase cover (page 4-46).
Hold the flywheel with flywheel holder, remove the
flywheel nut and washer.
Tool:
Flywheel holder 07AMB–NN4A100
Install the gearshift pedal.
Connect the alternator 3P (White) connector and ignition
pulse generator 2P (Natural) connectors.
Fill with recommended engine oil up to proper level.
Install the slid plate.
(1) 3P (WHITE) CONNECTOR
(2) 2P (NATURAL) CONNECTOR
Install the left crankcase cover being careful not to
damage the oil filter cover O-ring.
NOTICE
The left crankcase cover (stator) is magnetically attached
to the fl ywheel, be careful during installation.
Install and tighten the bolts in a crisscross pattern in 2 or
3 steps.
Install the new sealing washer and engine oil drain bolt,
tighten the bolt to the specified torque.
Torque: 22 N•m (2.2 kgf•m, 16 lbf•ft)
(1) LEFT CRANKCASE COVER
(2) BOLTS
(3) NEW SEALING WASHER/DRAIN BOLT
2
1
1
2
3
Loading ...
Loading ...
Loading ...