Loading ...
Loading ...
Loading ...
5-28
5-28
Frame Servicing
(1) BEARING
(2) DUST SEALS
(1) STANDARD LENGTH; 35 MM (1.4 in)
Pivot Bearing Replacement
Remove the dust seals.
Remove the pivot bearing and press a new needle bearing
so that it is 3 mm (0.12 in) below the pedal end.
Adjust the brake pedal height by loosening the lock nut
and turning the push rod.
Push rod height must be adjusted between 32.5 – 37.5
mm (1.3 – 1.5 in).
3 mm (0.12 in)
2
2
1
1
(1) NUT
(2) BOLT
(3) BRAKE PEDAL
Brake pedal
Removal
Remove the brake pedal pivot nut and bolt.
Remove the brake pedal and collar.
3
2
1
(1) BOLTS
(2) MASTER CYLINDER
Remove the mounting bolts and master cylinder.
Installation
Installation is in the reverse order of removal.
Connect the brake hose eyelet joint with two new sealing
washers, then tighten the oil bolt to the specified torque.
Torque:
Brake hose oil bolt: 27 N•m (2.8 kgf•m, 20 lbf•ft)
Bleed the air from the rear brake system.
2
1
1
Loading ...
Loading ...
Loading ...