Loading ...
Loading ...
Loading ...
6-3
6-3
Electrical Servicing
(1) SPARK PLUG CAP
(2) TIE-WRAP
Removal/Installation
Remove the fuel tank/injector assembly.
Remove the spark plug cap.
Remove the tie-wrap and release the spark plug wire from
the fan motor bracket.
2
1
(1) PRIMARY TERMINALS
Ignition system inspection
Ignition coil inspection
Measure the ignition primary coil resistance between the
primary terminals.
Standard: 2.6 - 3.2 : (20C/68F)
Measure the secondary coil resistance.
Standard:
With plug cap: 17.3 - 22.8 k: (20C/68F)
Without plug cap: 13.5 - 16.5 k: (20C/68F)
Replace the ignition coil if the resistance is out of
specification.
1
1
(1) BOLTS
(2) REGULATOR/RECTIFIER
Remove the bolts and regulator/rectifier from the electric
stay.
Install the regulator/rectifier and condenser in the reverse
order of removal.
2
1
Loading ...
Loading ...
Loading ...