Loading ...
Loading ...
Loading ...
Engine Servicing
4-8
4-8
(1) 2P (BLACK) CONNECTOR
Always replace the injector O-ring with a new one
whenever the injector is removed from the cylinder head.
Install a new O-ring into the injector groove.
Install the fuel feed hose between the hose stoppers on
the fuel pump base with new sealing washers.
Tighten the fuel hose banjo bolt to the specified torque.
Torque: 22 N•m (2.2 kgf•m, 16 lbf•ft)
Install the fuel tank onto the frame and connect the fuel
pump 2P (Black) connector.
1
(1) NEW O-RING
(2) RETURN HOSE
(3) FUEL FEED HOSE
(4) NEW SEALING WASHERS/BANJO BOLT
Install the fuel pump mounting bolts.
Tighten the fuel tank mounting bolts in the alphabetical
order shown in the illustration.
Torque: 6.9 N•m (0.7 kgf•m, 5.1 lbf•ft)
(1) FUEL PUMP
(2) BOLTS
Installation
NOTICE
Always replace the packing with a new one when the fuel
pump is removed.
Clean the mating surface of the fuel pump base and fuel
tank.
Install a new packing onto the fuel pump base.
Install the fuel pump assembly into the fuel tank while
aligning the packing slit with the fuel return pipe in the
tank.
Be careful not to damage the fuel pump wire.
Make sure the packing is seated against the fuel tank.
Also check that the packing is not placed on the fuel tank
boss.
(1) FUEL PUMP
(2) ALIGN
2
3
4
2
1
2
2
1
1
Loading ...
Loading ...
Loading ...