Loading ...
Loading ...
Loading ...
Engine Servicing
4-13
4-13
(1) WATER PUMP COVER
(2) BOLTS
Install the following:
– Dowel pins, new O-ring
– Water pump cover, bolts
Fill the crankcase with the recommended transmission oil
(page 3-8).
Fill the coolant and bleed the air (page 3-9).
(1) DOWEL PINS
(2) NEW O-RING
(3) WATER PUMP COVER
(1) WASHER
(2) WATER PUMP SHAFT
(3) NEW COPPER WASHER
(4) IMPELLER
Install the water pump shaft, new copper washer, and
impeller into the right crankcase cover.
Hold the water pump gear using a suitable tool and tighten
the impeller to the specified torque.
Torque: 12 N•m (1.2 kgf•m, 9 lbf•ft)
Install the washer and right crankcase cover (page 4-38).
(1) WATER SEAL
(2) OIL SEAL
(3) BEARING
Install the water seal into the right crankcase cover in the
direction shown in the illustration above.
Tool:
Mechanical seal installer 07965-415000A
Install a new oil seal in the direction shown in the
illustration above.
Drive the new bearing into the right crankcase cover
(Tools; page 2-8).
(1) MECHANICAL SEAL INSTALLER
1
3
2
1
1
3
2
1
1
2
1
2
3
4
Loading ...
Loading ...
Loading ...