Loading ...
Loading ...
Loading ...
5-25
5-25
Frame Servicing
Inspection
Clean the inside of the caliper.
Check for oil leakage from the caliper cylinders.
If any part of the caliper is damaged, replace the caliper
as an assembly.
Installation
Apply locking agent to the caliper mounting bolt threads.
Install the brake caliper and disc cover, then install and
tighten the caliper mounting bolts to the specified torque.
Torque: 26 N•m (2.7 kgf•m, 20 lbf•ft)
Connect the brake hose eyelet joint with two new sealing
washers and tighten the oil bolt to the specified torque.
Torque: 27 N•m (2.8 kgf•m, 20 lbf•ft)
(1) OIL BOLT
(2) MOUNTING BOLTS
(3) DISC COVER
(4) BRAKE CALIPER
Front brake caliper
Removal
NOTICE
Avoid spilling brake fl uid on painted, plastic or rubber
parts.
Place a shop rag over these parts whenever the system
is serviced.
Drain the brake system.
Place a clean container under the caliper.
Remove the following:
– Brake hose oil bolt
– Sealing washers
– Brake hose eyelet
– Caliper mounting bolts
– Disc cover
– Flange collars
– Brake caliper
– Spring pin for the pads
– Brake pads (page 5-26)
4
3
2
2
1
(1) BRAKE PADS
(2) PAD PIN
(1) CALIPER BRACKET
(2) BOSS/SLIT
Install the new pads and secure them with the pad pin.
Install the brake caliper bracket aligning its slit with the
boss on the swingarm.
Install the rear wheel (page 5-16).
Operate the brake pedal to seat the caliper pistons against
the pads.
2
1
2
1
Loading ...
Loading ...
Loading ...