Loading ...
Loading ...
Loading ...
Engine Servicing
4-34
4-34
(1) CYLINDER HEAD
(2) WASHERS/NUTS
(3) BOLTS
Cylinder Head Installation
Install the dowel pins and new gasket.
Install the cylinder head onto the cylinder.
Apply oil to the cylinder head mounting nut threads and
seating surface, install them with washers.
Install the two cylinder head 6 mm bolts.
Tighten the cylinder head nuts (cap nuts on right side) in
a crisscross pattern in 2 – 3 steps to the specified torque.
Torque: 39 N•m (4.0 kgf•m, 29 lbf•ft)
(1) DOWEL PINS
(2) NEW GASKET
Apply locking agent to the cylinder mounting sealing bolt
threads.
Install the cylinder mounting sealing bolt with a new
sealing washer but do not tighten it yet.
(1) CYLINDER
(2) NEW SEALING BOLT/SEALING WASHER
(1) CYLINDER
Cylinder Installation
Install the dowel pins and new gasket.
Coat the cylinder bore, piston, and piston rings with clean
engine oil and install the cylinder while compressing the
piston rings being careful not to damage the rings.
(1) DOWEL PINS
(2) NEW GASKET
1
1
2
1
2
3
2
1
1
1
1
2
1
Loading ...
Loading ...
Loading ...