Rigol MSO7024 User Manual

Loading ...

RIGOL Chapter 2 To Set the Vertical System

2-10 MSO7000/DS7000 User's Guide

Amplitude Unit

Select the amplitude display unit for the current channel. The available units are W, A,

V, and U. When the unit is changed, the unit related to the relevant functions of the

channel will change accordingly.

Press 1  More  Unit, press Unit continuously or rotate the multifunction knob

to select a unit. You can also enable the touch screen to select the desired unit

with touch gestures. The default unit for the value is V.

Channel Delay

When using an oscilloscope for actual measurement, the transmission delay of the

probe cable may bring relatively greater errors (zero offset). MSO7000/DS7000

allows you to set a delay time for calibrating the zero offset of the corresponding

channel. Zero offset is defined as the offset of the crossing point of the waveform

and trigger level line relative to the trigger position, as shown in Figure 2-2.

Figure 2-2 Zero Offset

Press 1  More  Ch-Ch Skew, rotate the multifunction knob or use the

numeric keypad to set the desired delay calibration time. The available range of the

delay calibration time is from -100 ns to 100 ns.

Note: This parameter is related to the instrument model and the current horizontal

time base setting. The larger the horizontal time base is, the larger the setting

step will be.

Actual Trigger Position

Trigger

Level

Loading ...

Rigol MSO7024 Oscilloscope